Forum Replies Created

Viewing 15 posts - 76 through 90 (of 170 total)
  • Author
    Posts
  • in reply to: thinking about buying Breakaway hardware #10010
    camclone
    Member

    it seens that the " targeted group" of this forum is full of people who don’t have big commercial radio stations 🙁

    it’s time for some publicity Leif and Jessie !

    When the hardware box is ready you should start publishing the news to the globe not only on… google crawler. ( big radio stations give money for a " big box " , small pirate stations don’t .

    anyway, let’s wait until leif is ready for some demo hardware systems.

    in reply to: High Pass Filter OFF-30-45-or…soft-30-soft45… #10005
    camclone
    Member

    wow!
    you can’t imagine how the "FM loudness competition " is down here in this Greek Island!
    Everyone overmodulate, everyone mpx clip,
    but ..with breakaway broadcast i am the only one who broadcast at 75 KHz and i am louder than those who are at 150 KHz!

    i wanna be loud ..
    at the FM dial , my station is very clean, but you are right! the stream is very messy.
    Blame … Simplecast and WMA 🙂

    i use the same server for stream and FM MPX.. that’s a problem

    anyway

    Leif, can you make a soft ( not brickwalled ) HPF setting?

    in reply to: High Pass Filter OFF-30-45-or…soft-30-soft45… #10003
    camclone
    Member

    yeap,
    you where right
    i lowered the final drive a lot now.

    now it’s better.

    that final drive was the cause of that mess ( as always i do the same mistake, i make a sound and finnaly…i increase the final drive and ..mess it up 🙂)
    now ok!

    i also, increased the output so now it ‘s 0 db .

    check now plz 2 or 3 songs plzzzz

    ( let’s talk about soft brickwalled… high pass filtering.. )

    in reply to: Anyone having crackles/slowdowns, read this. #9968
    camclone
    Member

    very very vegy good presentation!

    but check your breakaway presets and try some more settings on other presets…

    breakaway presets are like an encyclopedia 🙂
    🙄 🙄 🙄

    in reply to: FM Composite Clipping ( mpx clipping software or hardware ) #9946
    camclone
    Member

    so,
    finnaly,

    at this time the only "fm Advanced mpx clippers" are on Omnia and Orban ( hardware ) and Stereotool ( software) ?

    any other program or hardware?

    wow!

    planet earth has only 3 competitors ?
    :mrgreen: :mrgreen: :mrgreen: :mrgreen:

    in reply to: Orban step it up a gear..Is BBP up to the challenge? #9878
    camclone
    Member

    Leif,
    If Bob Orban makes you a money offer to work for him… will you go ? ?!!: 🙂

    say yes say yes say yes 🙂

    Your BB program is almost finished and will live for 15 + years
    Now it’s time for publicity and …money 🙂 why don’t you work with them ? it’s time to move again to another country i think..🙂

    sorry for beeing rude.
    😳

    in reply to: Breakaway live preset for vinyl #9786
    camclone
    Member

    wow !
    this is like a paradise!
    but ….Greece has 1223423204200 more places like this 🙂
    Let’s get in topic :!

    !! Maiby a preset that has the 3 first bands proccesing focus on LOW BASS FREQUENCIES ?!?!?!

    wow , can you imagine ?! a preset that has the 3 of the 6 bands focused on that low low deep wow wow bassy frequencies..
    🙂

    can JessieG or Leif make such an Earthquake preset ?!??!!??

    in reply to: DSP plugins for AGC before the proccesing for breakaway ? #9791
    camclone
    Member

    yeap! that’s also very good idea,
    if the DSP plugins are loaded after the bult-in breakaway AGC control they will perform excellent with all songs,
    100% efficiency 🙂

    that’s good!

    in reply to: BBP & BBP ASIO & BA LIVE 0.90.93 #9069
    camclone
    Member

    That’s the truth,
    to make the ultimate loudness/clearness sound you have to check the sound on many types of speakers!

    Leif,
    the clicks on the .93 version with the new pipelines happen whatever settings o make on IO settings..

    I never had such a problem before with earlier versions.

    My system is broadcasting with realtek onboard soundcard and i tried many versions of sound drivers.
    with .87 version everything is excellent, but not with .93.

    the clicks are very audible on the internet stream which goes through "breakaway pipeline 2" internaly.

    i now run with .87 and i m ok

    in reply to: BBP & BBP ASIO & BA LIVE 0.90.93 #9062
    camclone
    Member

    Dear Leif!!!!!

    BaaaaaAAaaaaad news.. 🙁

    It’s the first time i have problems with small clicks on my Breakaway Broadcast ( BBP ) version.
    using .93 version!
    i went back to .87.

    ( the clicks become audible from the first minutes of use ) ( .93 )

    until .87 i never had any problems with ANY buffer configuration and with ANY other settings used and with ANY graphics and audio card drivers versions at the same hardware configuration.!!!

    maiby it’s the latest pipeline version problem 4.9.8.2388 .
    i am sure that the cause of the problem is that g@@d d@@@m f@@@cking version 4.9.8.2388

    i went back to 4.9.5.2253 with .87 version and i am now ok.
    the problems are audible from the first minutes of use , i repeat.. 🙂 ..

    …not after X XX days.

    p.s. check my FM broadcast here : http://1045fm.live24.gr/1045fm/ ( it s windows media audio with 75 msec preemfasis for emergency STL handover proposes.) i know that this audio codec has overshoots..don’t shoot !!! 🙂
    it’s more clear and loud than everrrrrrrrrrrrrrr!

    i found a way to make good settings … i stopped configuring my sound using headphones !!! that’s the secret!! do neeeeeeeeeever use headphones for FM broadcast (loudness/clearness) sound setup!!
    only external speakers!! thanksss!

    in reply to: Studio to Transmiter Link (STL) setup #9303
    camclone
    Member

    Hey dudes 🙂)
    this "software STL through WiFi " project has no money ( for programmers ) in the "real world" of radio stations around the world.

    I mean that. Leif, cannot make much money with that project .

    I think that Leif thinks more clear than ever 🙂 He must find a secure way of publishing his applications..and that was …using hardware 🙂

    MPX clipper …hardware..
    digital STL …hardware..
    Digital direct synthesis Exciters ..hardware.

    Using a windows pc…is cheap but …cheap..
    using a special hardware system without ..windows ..is stable, secure and the programmer ..will make much more money becuse of that "real world" theory.

    by the way… software STL should be very easy to make i think.
    someone will make this !! who knows!

    in reply to: Studio to Transmiter Link (STL) setup #9300
    camclone
    Member

    Hi Dimitris!

    You are totaly right about my overlimited,clipped sound 🙁
    If i was broadcasting in Athens i would totaly prefer clean sound than over-loud 🙂
    Let’s talk about STL 🙂

    I wish someone could make a program which will do all the nesecary things you ask!
    I want to buy that !!
    0.0000 % tilts STL by WIFI with emmergency backup 192 KHz recorded playback!! wow! 🙂 i wish this could come true for a clean and loud 75 KHz broadcast !!

    does anyone know a program like this ?

    🙁 🙁

    in reply to: Stereo enhancer settings #9307
    camclone
    Member

    very very very interesting topic 🙂

    The stereo enhancer of breakaway can change completely the colur of your sound !
    i live this !

    in reply to: Studio to Transmiter Link (STL) setup #9298
    camclone
    Member

    Are u talking to me ? ? are u talking tooooo meeeeeeeeeeeeee ? 🙂)

    Hey, if all the radiostations in my area could be legal with 75 KHz deviation you would see the advantages of my sound.

    i sound loud and …as clear as it can go with that extreme breakaway settings.

    i know how to become more clear with all types of music using breakaway default settings BUT i want to be loud and legal 🙂

    my station 75 KHz has exactly the same loudness with all the others who overmodulate with 120 KHz!
    but , my station doesn’t sound to "people’s ears" the same as some stations that overmodulate with 180 and 200 KHz 🙂
    i can be as loud as 120 KHz stations but not ..as loud as 180 and 200 KHz stations.

    i know how to become more clear but i prefer ..extreme loudness and legal modulation….thats all folks!

    p.s.
    Don’t forget that ..if broadcasting at 75 KHz modulation you will be compatible with all all all the radio recievers in the world !! ( car stereos, home stereos, mp3 players..bla bla bla…)
    if i play at 120 KHz with my extreme settings…..i am sure that you will be excited 🙂 🙂 🙂

    in reply to: Ultra-thin Flexible Solar Powered FM Radio, WiFi possible #9038
    camclone
    Member

    i had that idea 10 years ago.. 😛

    but not solar powered 🙂

    for radio promotion !!

    yes , fixed tunning!!

    solar!!

    wow!

    —– where can i buy 10.000 of them ? —

Viewing 15 posts - 76 through 90 (of 170 total)