Forum Replies Created
-
AuthorPosts
-
BokiMember
[quote author=”Leif”]And, why would you want to multicast the MPX?[/quote]
me?
Because Processing pc will be in studio and not at transmitter site. At transmitter site can be good old Pentium III (i currently have rack server pc) with proper soundcard.
This also enables to have remote and direct processor adjusting.BokiMember[quote author=”Modulator”]Nice! Those Bullets (http://ubnt.com/bullet) look good[/quote]
I tryed almost ALL of ther products .. Bullet5 and Bullet5M are best. You can use antenna by your choice. Ground is good already trought antena’s connector, antenna and tower. This is important because LANs are very sensiteve in this units (not wlans)With two of these http://voltplus.co.rs/Antene/P-serija/P … 5535P.html i have one link at 50km and it’s very reliable!
There many other good antenna manufacturers all over planet.BokiMemberFor example ..
I have 5GHz link with 2 Bullet’s5 and STL software. Two 48kHz 16bit Stereo streams goes trought it. It’s about 2×1.6Mbit troughtoutput. And it works very well.
Only better next step would be to have FLAC 192kHz mono.. to send, so PC with processing software will be at studio and not to transmitter.
Currently there is no software like that.
I would like to see something like that. 🙂BokiMemberi bet on windows7/drivers
BokiMember[quote author=”Leif”][quote author=”timmywa”]What about the much storied and legendary LeifCast??[/quote]
Probably not, unless you can think of a magical way to get licenses for all the codecs.[/quote]Just do not put any codec… user will do that. But that’s not the point, right ?
BokiMember[quote author=”wouter”]i ment with stuck, you can always hear the basic part of the preset, and if you take a look at stereo tool, you can make your sound much more personal.[/quote]
True, but again you must know what you are doing. It’s not that simple to make good preset.
There are good reasons why BBP does not have all settings avaliable. And in most (user) cases that is confirmed.BokiMemberLeif.. did you get exciter from Stelios ? I would like to hear from You how it works.
edit: And what about demo i requested from You?
BokiMemberAtom D525 have 1MB cache and that can be problemm too.
In other hand G620T is 3MB cache.G620T will do better job not just because it’s @ 2.2GHz.
BokiMemberNow it’s different story 😛
But there is still too much highs.BokiMember[quote author=”bennylein1985″]Works very good.
http://media.piraten-radio.net:8000[/quote]
If it’s good for you, ok. But for me it’s not.Bit tiny sound, not so loud and peek level can go much more (about 2dB more), strange highs (probably from vitalizer). On top of that there is strange noise like you re-broadcasting from FM and near neigbor station comes in.
BokiMemberTry Free Sound Recorder.
http://www.sound-recorder.biz/freesoundrecorder.htmlBokiMemberwe are learning .. 🙂
BokiMember[quote author=”peatgy”]Sigmacom is interesting seem to be good.[/quote]
Good? It’s best. Did you miss…
[quote author=”JesseG”]This is the last exciter you’ll ever need. 8)[/quote]May 24, 2011 at 12:37 pm in reply to: Is this working for my stream without 50us pre emphasis #12234BokiMember[quote author=”antonlamers”]Do i have on the L/R out also 50us pre emphasis?[/quote]
Unfortunately, yes.
-
AuthorPosts