Forum Replies Created
-
Posts
-
Best is to use BBP on transmitter site. And to use Airomate for the RDS. With the Marian trace alpha you will have DC straight output for your transmitter. If you would first feed this through the pira RDS you will loose this. Or when you want to feed it back in you need expensive sound card. So it’s better to do all in software. It is stable and high quality.
And you can use an encoder plugin within BBP for the streaming. The normal BBP version will be enough if you don’t need low latency and it will also sound better.There will be no processing freakday this year.
[quote author=”didac”]I uploaded to my server files that were in these two sites:
http://mpxtool.com/site/meetdag2009.html
http://mpxtool.com/site/torture-test.htmlThe URL for download is: http://www.totradio.com/mpx/
See U![/quote]
Thank you very much !!! 😀This mod works beautiful to protect against spammers: http://custom.simplemachines.org/mods/i … p?mod=2932
The MPX recordings of the processing freak day are online on the processingfreakday site.
@OmniaAudio / EastWind3712
Next time please ask me before you place a copy of my movie on youtube and on your company website.High quality movie available here http://processing.jongerenwebsite.net/
It’s online http://processing.jongerenwebsite.net/
Recorded it with a mobile phone and missed some part of the presentation but most of it is there.BBP is set on maximum CPU automatically. I’ve calibrated for tilt with the scope method and lowest deviation on the analyzer and deviation meter. The measurements i have shown here where done with my onboard soundcard. I have seen better results by someone else with the same song. I will do some testing this week or next week with the juli@ card and will post my results here. I need to order some memory to make my other system going again.
I’ve tried to replicate it, i’ve put the 400 Hz tone tone again on the transmitter. The MAX values are going from 75.2 till 76.3 over a period of a few minutes. So that’s within the +/- 1 Khz deviation error. AVE goes from 74.9 till 75.1. My experience is that the analyzer needs a strong signal to measure good.
When i change to music MAX goes till 91.1 KHz with a clipped song but generaly above 75 Khz and with a lot of music around 80 KHz. I think this is a big difference. I also see it on my modulation meter on the transmitter who is also going till about 90 Khz with 30 Hz HPF in BBP. When i change it to 60 Hz the MAX goes till 83,5 KHz on both meters. The deviation error for typical content is +/- 2Khz for the pira analyzer so 77 Khz should still be fine.
How do you verify that there are no overshoots?
