Forum Replies Created
-
Posts
-
It sounds like whatever you're using to monitor your stream is turning up the bass a lot. You should use a reference quality decoder that isn't going to do *anything* to change the sound between decoding and sending to your soundcard. And you'll want the soundcard of anything used for referencing to also not do *anything* to the sound before it is sent to your speakers. 🙂
The one exception to the rule would be using the speaker eq correction within Live to fix frequency response issues with your monitoring, if there are any. (just about every speaker can benefit from a correct/accurate eq compensation though)
You can also just use the pipeline configuration program that comes with Live, Pro, DJ, etc to set the number of pipelines you want to have, among other things.
[quote author=wibg1020 link=topic=579.msg16605#msg16605 date=1391632568]Here is the question: [..] Does the Breakway Broadcast unit conform to the ridiculour NRSC mask?[/quote]
It does. 🙂 and can also allow an adjustable amount of positive asymmetrical peaks, from 100 to 150 % 🙂The demo is free to try out, of course. See what you think of it in a scope.
[quote author=Boki link=topic=3698.msg16574#msg16574 date=1390578190]
I can just repeat myself. You need old driver! Also 32bit Windows – XP or 7. "BBP Asio" will not have Audio on outputs with any newer driver then 2.01/2.02 (forgot wich one).
[/quote]
Noted. 🙂 Does this hold true for the new unified drivers?I don't see a link at all, and I actually don't have that zip file. Could someone send it to me so I can fix this topic?
I can recommend Foobar, if it's possible to setup to automatically start streaming. It has a transparent-sounding audio path in it. You can use "sc" from the command line to make ~any program run as a service by the way. But for non-CLI software it might be a better idea to have the machine auto-login and have it somewhere that autoruns after login. Let me know if you try it as a service, if it works or not. (i don't know if it would show the GUI after logging in, if you run it at boot, before logging in) One benefit of a service running even after login is that it can restart itself if it crashes.
It's hard to believe that only the Exstreamer 1000 has a digital output on it.
Try this in BAE, even though it might seem counter-intuitive at first…
and you'll find that it actually has the least amount of peak control (limiting in this case) than most other ways to set Breakaway, and it doesn't sound very processed either. Set the range as desired.[quote author=Dicky link=topic=3698.msg16548#msg16548 date=1389782415]
Hello, I need help setting BBP ASIO and Marian Trace Alpha. I had trying but no sound. can give me some indication.
next my setting BBP ASIO and Marian Trace. Help me to give the solution.
[/quote]
I can't tell what's going on in the screenshot of the trace mixer, because the screenshot is too small, but have you also checked the ASIO config? Seems that it would be a routing issue in the Trace's settings.[quote author=Boki link=topic=3698.msg16480#msg16480 date=1388500340]
You need 32bit OS and old driver for marian trace 2.02 or 2.01
http://www.marian.de/files/trace_alpha/
[/quote]
Actually, unified 32 & 64 bit divers for XP-8.1 are released for a while now.
http://www.marian.de/en/downloads
Cheers[quote author=mark091991 link=topic=3696.msg16554#msg16554 date=1390182761]I did a lot of settings brakaway and I noticed that the software sounds better on pc with intel and amd worse on those. The confirmation I got it this week, I calibrated a pc intel i5 and the same preset is now on a pc amd athlon x2 and the sound is very different. Is this normal?
Same calibration of both breakaway and with the sound card esi juli@[/quote]
Have you tried recording both to see if you can blind ABX the supposed difference?[quote author=NorthSound link=topic=579.msg16534#msg16534 date=1389474081]
Where the diagrams gone ?? 🙁
[/quote]
They were in the posts, but somehow not showing up. I refreshed the posts and they are showing up now. Thanks for noticing.
