Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #2910
    twelch1980
    Participant

    I am using CHR on my station at the moment. The only problem I have is thtmat sometimes the S,T and Fs come across a bit harsh and distorted. Not terribly but some. What settings should I try to ease this up a bit.

    Breakaway Live
    CHR
    Volume -6
    Range 35
    Power 42
    Speed 60
    Bass -10
    Shape 0

    #14080
    kes11
    Member

    Try:
    Range – 50
    Power – 55
    Bass Cut – Set this to -40 or lower (Compressing the bass will clear up some of the T sounds you're hearing)

    Bass shape is fine at 0

    This will give you a different sound but it will allow the MB to work a little more and that will help. I would make sure that no speaker settings are enabled. Also make sure Noise Reduction is on (checked) so the MB section works at it's optimum.

    If those setting do not satisfy try The Regulator setting. If you want CLEAN and well defined sound that you can sculpt try Zenith. Bass cut -50 Range 54 Power 71.

    #14081
    kes11
    Member

    A link to your stream might help too.  😮

    #14082
    twelch1980
    Participant

    Here is my tune in link. I will try those settings as well.

    tunein.com/radio/965-The-X-s221182/

    #14083
    twelch1980
    Participant

    I disabled the EQ plugin I had on in the chain to add a bit of sparkle to the highs. Maybe that will cure the problem. But I am missing the crispness that I had with the EQ. Any setting suggestion for that?

    #14084
    dancemusicradio
    Participant

    what EQ plugin are you using?

    #14085
    twelch1980
    Participant

    Its called 4front eq from yohng.com. it was recommended some time ago.

    #14086
    dancemusicradio
    Participant

    thanks, going to check it out

    #14087
    Ayan
    Member

    Maybe that will cure the problem. But I am missing the crispness that I had with the EQ. Any setting suggestion for that?

Viewing 9 posts - 1 through 9 (of 9 total)
  • The forum ‘Breakaway Professional Products – [discontinued]’ is closed to new topics and replies.