Airlink STL?

Home › Forums › Breakaway Professional Products – [discontinued] › Airlink STL?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 4, 2010 at 8:33 pm #676
    Anonymous
    Guest

    Sorry if this is not allowed but you seem like the type of folk who would know, Im having trouble with the Airlink programme. The receiver end doesnt work no matter what the IP address is, it works on web streams etc but when i put the IP address of the PC I want to recieve off into it, it doesnt connect. Its allowed by firewalls and all that stuff. any help appreciated.

    February 4, 2010 at 9:57 pm #9814
    Anonymous
    Guest

    update, it works on the IP address of my ISP but id like it to work on the IP address of the TX PC

    February 5, 2010 at 5:53 am #9815
    JesseG
    Member

    Sounds like you’re trying to have the packets routed from LAN to LAN on a local NAT router, but your router isn’t setup to properly handle "loopback" connections.

    February 6, 2010 at 1:08 am #9816
    Anonymous
    Guest

    It appeared to be a ping issue, we couldnt ping this particular PC but I fixed that, however I cant connect to it with the RX programme. But can connect to every other PC on the network with an RX programme if that makes sense?

    February 6, 2010 at 4:21 pm #9817
    JesseG
    Member

    Could be a firewall issue even, with Windows Firewall. Have you tried adding the port numbers it uses explicitly in addition to the software explicitly ?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Breakaway Professional Products – [discontinued]’ is closed to new topics and replies.