Forum Replies Created
-
Posts
-
In the FM stations where I work, we still have analog sources such as the Telephone Hybrids, Console, Microphones, Preamps, so we are obliged to maintain analog equipment until the input of the processor. Webstreaming is the only digital form we have.
All our audio reaches the console and this passes the PGM audio to the processor with analog audio input.
That is where I cited my concern: While the manuals of the processors of other brands, except BAO. They recommend sending flat audio, without any processing prior to the input of the FM processor.
I have seen people, that after the console enters the audio to a Behringer SX43040, others like CRL, Symetrix, DBX, in software I have seen someone use FX Sound Enhacer, with the aim of improving the audio material (we could say their tessorship ) that will finally enter your audio processor.
I am perfectly clear that MP3 is not broadcast quality audio.
Thanks to MrKlorox for sharing your experience and taking the time to read the manuals. Just as you are a fan of digital audio and it seems to me the goal of any broadcast station, it should be to migrate your airchain to the digital environment as far as possible.
But come on, I see many readers of this thread and still do not dare to participate. What do you think about the use of audio exciters, prior to the processor?
Of course it is possible, Leif has made a demo on his YouTube channel, precisely with that configuration.
For now I recommend you check the percentage of use of the PC processor. If it is too high it can generate glitches, also check the ASIO buffer, as you have configured it. If the buffer is very small, it also produces glitches.
Esi Maya is known for presenting problems in audio stability. You have the option to try another sound card including 48 Khz sample rate, broadcast in Mono + Streaming
As a reward the transmission in Mono increases the coverage in Fm
Regards
You must use the output of L / R audio BPP to enter the Inovonics. This output does not have pre-emphasis.
I have understood that the DSP plugins also receive audio without prenfasis.
If you want to apply some pre-emphasis to your audio stream, you have to use the Edcast Standalone and enter the audio via the pipelines.
Regards
Perhaps what you need is something like this:
http://vb-audio.pagesperso-orange.fr/Voicemeeter/banana.htm
Regards.
The solution is: go to settings and select energy saving profile "high performance".
This is part of the list of procedures that must be performed on the operating system on any computer that will be used to sound.
-If you still has problems, do a clean install of Windows.
-If that does not work, change Mobo.
I hope to be of your help. regards
