Breakaway buffer settings

Home › Forums › Breakaway Audio Enhancer › Breakaway buffer settings

Viewing 6 posts - 16 through 21 (of 21 total)
1 2
  • Author
    Posts
  • August 20, 2008 at 3:27 pm #4212
    Anonymous
    Guest

    [quote author=”Leif”]
    So, I will ask you to try one more thing:

    Try Breakaway in safe mode (either WaveOut or DirectSound).

    Does it still do it?

    ///Leif[/quote]

    It will still do it in WaveOut and DirectSound.
    I’m through this already.
    PCI Soundcard mAudio Delta 1010LT locked at 44.100 Khz.
    Windows XP Pro SP3 on an AMD 1800.

    August 21, 2008 at 11:46 am #4213
    Anonymous
    Guest

    Hi Leif!

    The test using safe mode and wave is finished. The 9:55hs sound file recorded is clean, without stops nor "helicopters".

    Today, I´ll make the wave test over again (at least 19:00 hs), to confirm the result.

    Carlos.

    August 21, 2008 at 12:42 pm #4214
    Leif
    Keymaster

    Hi Carlos!

    Allow me to clarify — the Safe Mode checkbox in the wizard, controls only what audio interface to use for output.. That’s *all* it does — if you’re changing the Interface drop-down in the expert configuration window, whether Safe Mode is on or off, doesn’t matter.

    With that out of the way, did you say that using KS for input and Wave for output, still had the dropouts? I’m confused — can you tell me which Input and Output interfaces you were using?

    ///Leif

    August 21, 2008 at 1:02 pm #4215
    Anonymous
    Guest

    Hi,

    Using wave for input and wave for output, don’t had dropouts. The sound recorded is clean.

    Carlos

    August 22, 2008 at 12:00 pm #4216
    Anonymous
    Guest

    Hi Leif!

    My lasts tests:

    18:40 h – Wave input / Wave output – No dropouts
    9:30 h – KS input / DS output – No dropouts

    To summarize my tests:

    1. KS input / KS output – Stop 3.6 s to each 6:11 h
    2. Wave input / Wave output – No dropouts
    3. KS input / DS output – No dropouts

    After this, what’s a best settings to my system? Wave input/Wave output or KS input/Ds output?

    Carlos

    August 23, 2008 at 12:31 am #4217
    Leif
    Keymaster

    Hi Carlos!

    Excellent find. Ever thought about working in Quality Assurance? 🙂

    Thank you so much for your help. Not that you’ve shown me where to look, I believe I’ve found the problem!

    I went over the kernel streaming code with a fine toothed comb, and I believe I found something.

    Can you try the latest version (RC4) with KS in, KS out?

    RC4 will be up soon.

    New version will also have DS input available.

    Thanks again!

    ///Leif

  • Author
    Posts
Viewing 6 posts - 16 through 21 (of 21 total)
1 2
  • You must be logged in to reply to this topic.