PEQ adjustment impossible?

Home › Forums › Breakaway Professional Products – [discontinued] › PEQ adjustment impossible?

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • October 31, 2009 at 10:36 am #532
    Tempico
    Member

    Hello,

    I’m trying to calibrate my soundcard.
    It worked out for the tilt correction.
    Tilt is now set to 5 and Coeff is set to -20.
    Coeff adjustment doesn’t has much effect to the signal.
    Is that normal?

    Now when i look here:
    http://www.claessonedwards.com/index.ph … &Itemid=84

    It must be possible to adjust PEQ as well.
    But the sliders in BBP are dark and i can’t change the values.. 😕

    I’m using BBP ASIO and a M AUDIO audiophile 192 , Windows XP sp3 .

    Setup: Mixer – BBPASIO – exciter.

    I made some screenshots:

    Am i missing something?
    Or do i have the wrong settings?

    Alreay reinstalled BBP and soundcard drivers/ software.
    But no effect.

    October 31, 2009 at 11:28 am #8832
    Leif
    Keymaster

    The coeff does have an effect – you can see it clearly if you turn tilt excessively high and then adjust the coeff while looking at the scope.

    PEQ is not available in low latency mode, as phase linear PEQ itself actually adds more latency! If you set it to Phase Linear mode, the PEQ controls will be enabled.

    It’s basically a choice one has to make — if you need low latency, you will have to have a good exciter and sound card, which will then not need any PEQ correction.

    ///Leif

    October 31, 2009 at 12:31 pm #8833
    Tempico
    Member

    So it’s better to use Low latency?
    The transmitter is a Siel.
    Soundcard M-audio 192. (juli@ was out of stock)
    Not bad stuff if you ask me.
    It sounds great already 😀

    What i ment about the coeff:
    It does’t effect the signal as much as the tilt does.
    When i set it extremly high or low i see changes on the scope.

    October 31, 2009 at 1:06 pm #8834
    Lee XS
    Member

    By the way you’re using the old software/driver for your card, which is crap. Do a quick search and grab the latest, it’s much better!

    Don’t know why they’re still shipping new cards out with the old disc!! 👿

    October 31, 2009 at 3:06 pm #8835
    Tempico
    Member

    Thanks 🙂
    Updated to version :
    Panel 5.10.0.5069
    Driver 5.10.0.5069

    That seems to be the latest.

    October 31, 2009 at 3:23 pm #8836
    Lee XS
    Member

    yeah I think that sounds right…have you got the new GUI? If so then that’s it. 😀

    October 31, 2009 at 4:28 pm #8837
    Leif
    Keymaster

    Phase Linear will sound better than Low Latency. However, Low Latency is.. well.. Lower Latency 🙂.

    If you must monitor off air then you have no choice — Low Latency is the only option.

    But, if you can use the Studio Output for monitoring instead, then you can turn on Phase Linear and get better sound on the air but still have low latency monitoring!

    Best,
    ///Leif

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Breakaway Professional Products – [discontinued]’ is closed to new topics and replies.