help! "Audio device STALLED"

Home › Forums › BreakawayOne › help! "Audio device STALLED"

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 7, 2019 at 3:45 am #3737
    beej6
    Participant

    Something has happened to the transmitter side of my BaOne setup – cannot access it by BaRemote. Service is still running, but fails TEST. Please advise.

    September 8, 2019 at 10:30 pm #15291
    Milky
    Keymaster

    I've had this happen a couple of times when my USB audio device appeared to be functional, but no sound was coming out. I used to just wake the PC from Sleep mode via "Wake Up On LAN", but now I wake it up and force a reboot before connecting. It takes a little longer (PC has an SSD) but it makes sure everything is restored.

    September 8, 2019 at 11:45 pm #15292
    beej6
    Participant

    Thanks Milky. I'm afraid this wasn't quite as easy. Besides forcing a reboot, I also tried to switch CPUs, using the sound card in a different computer.
    None of this worked. Back in the original CPU, it's as if BaOne and the existing soundcard (which have been running together for >9 months) can't talk to each other.

    And it may not be the card, either… because I have my backup audio processor (OmniaSST) back on the air, and it has no issue with the soundcard.

    I may have to go back to the BaOne config, maybe something got corrupted?

    November 23, 2019 at 11:20 pm #15293
    beej6
    Participant

    Finally trying to resurrect my BaOne setup, actually new transmitter side computer…

    On the 1/O, all the tests run well, but actual I/O status = Init failed, error – unknown error… Any ideas? I can dig deeper into my audio card (Marian Trace Alpha).

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.