Asio "can not configure it"

Home › Forums › BreakawayOne › Asio "can not configure it"

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • June 29, 2019 at 9:33 am #3706
    capitano
    Member

    hi, help me,i would configure asio driver but have always the same error:
    I have Basic Fm cores 1
    Juli@ souncard

    Darn it, what am I doing wrong?

    Attachments:

    June 29, 2019 at 1:26 pm #15275
    Milky
    Keymaster

    Is the Juli capable of 192K?  If so, have you gone into the device interface (ASIO Driver Interface button) and set it for that? Then you need to refresh for the soundcard parameter to import into BA1.

    June 29, 2019 at 4:10 pm #15276
    beej6
    Participant

    The Juli@ is definitely 192K capable.

    June 30, 2019 at 7:01 am #15277
    capitano
    Member

    Sorry!!!I didn't understand a thing! 😮

    July 1, 2019 at 9:19 pm #15278
    Milky
    Keymaster

    You need to press the second button from the bottom, or go into the Julia software interface manually and set the parameters there. BA1 picks up the ASIO config from the Julia setup. If that is wrong, then you will not be able to proceed.

    The image is saying that the Clock SOURCE is invalid, not the clock RATE. You will need to set this through the Julia interface.

    July 2, 2019 at 12:48 pm #15279
    ddtop
    Participant

    [quote author=capitano link=topic=5840.msg20198#msg20198 date=1561800802]
    hi, help me,i would configure asio driver but have always the same error:
    I have Basic Fm cores 1
    Juli@ souncard

    Darn it, what am I doing wrong?
    [/quote]

    Hello, maybe you have enable internal pll? If so ,you can't use it in asio.

    Best.

    July 2, 2019 at 6:38 pm #15280
    capitano
    Member

    thanks i will try 🙂

    July 28, 2019 at 10:29 pm #15281
    ddtop
    Participant

    [quote author=capitano link=topic=5840.msg20208#msg20208 date=1562092712]
    thanks i will try 🙂
    [/quote]

    ..so, you fix it?

    September 10, 2019 at 11:20 am #15282
    capitano
    Member

    no 🙁

    September 11, 2019 at 11:48 am #15283
    ddtop
    Participant

    hello,
    maybe you have install wrong drivers? (pci or pciexpr?)
    https://download.esi-audio.com/?w=esi&p=6&g=1&l=en

    What system and OS you have? Be more specific please.
    The BreakawayOne config setup should be like this: (Win10 64bits 1903 with yasterday updates 10/09 and 1.21 juli@ driver)

    Attachments:

    September 12, 2019 at 2:57 pm #15284
    capitano
    Member

    … 🙂 thanks work now 😉

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.