- This topic has 7 replies, 3 voices, and was last updated 7 years, 8 months ago by
.
-
Posts
-
Hey!
I been a user of Breakaway for a long time and have always used the pipelines for input. When i installed the new Breakaway One with the pipelines i don't get the sound to go through. Input has been set to pipeline 1 and output my sound card in Breakaway config. In Winamp i have set WaveOut pipeline 1. No input sound in Breakaway. All quiet. I have rebooted my computer and still no sound. I have never had problems to set this up with the old version of Breakaway.
Any ideas?
In BreakawayOne config, what Input/s and Output/s are you using? In BreakawayOne App/Service, what core/s are you trying to use?
[quote author=JesseG link=topic=5411.msg19144#msg19144 date=1489181680]
In BreakawayOne config, what Input/s and Output/s are you using? In BreakawayOne App/Service, what core/s are you trying to use?
[/quote]Input pipeline 1. Output my Arrakis ARC 8 mixer with built in usb sound card.
I use only the HD cores.
What I was asking is what inputs & outputs are you using in BreakawayOne, so I can know if you are not routing the signal correctly in BreakawayOne.
[quote author=JesseG link=topic=5411.msg19150#msg19150 date=1489348478]
What I was asking is what inputs & outputs are you using in BreakawayOne, so I can know if you are not routing the signal correctly in BreakawayOne.
[/quote]Check these pint screens.
https://www.dropbox.com/sh/cgvm7hqf9lk05hi/AAASXEm_XJIld40fpuU_fH5za?dl=0
"No block size selected", so… go back into Config mode, and click on "Auto-configure Block Size" for each of the inputs & outputs you're using.
You should also use "Kernel Streaming" interface whenever possible. You should usually get lower frame jitter from that, vs Wave.
The other thing I see that's wrong is that you're assigning 3 different things to the same soundcard output. If you want to be able to have a physical soundcard output that can switch between different patch points, use the "Monitor Output" for that.
- You must be logged in to reply to this topic.