hELP with sound

Home › Forums › Breakaway Professional Products – [discontinued] › hELP with sound

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 30, 2015 at 1:47 pm #2866
    gmatsiras
    Member

    Hi, i am trying to get as possible good sound on my radio. I use Esi Juli@ soundcard with digital connection to an ip sound encoder from sigmacom broadcast. I use the Plutonium configuration with Final drive -0.5    Range 50  Power 55 Speed 50  and Bass cut -10
    I also use airomate for rds. I have a good Bass sound but i think there is too much treble and i don't know how to reduce it. I have also a dsp attenuator 6db as a plug in because some times the output flashes red.
    Is there anybody that could help me??? Thanks in advance

    January 30, 2015 at 4:26 pm #14059
    Boki
    Member

    Try rustonium..
    set bass bit lower and final drive bit more.

    January 30, 2015 at 7:42 pm #14060
    dancemusicradio
    Participant

    maybe bring down the drive to -1?

    February 1, 2015 at 12:36 am #14061
    kes11
    Member

    Zenith is nice and balanced, also very transparent.

    February 1, 2015 at 3:55 pm #14062
    capitano
    Member

    it is usually when use the (Virtual cable VAC) and enable volume control ,have the output flashes red in Breakaway,It Has Happened To me.
    For me the best preset for fm is CHR

    February 12, 2015 at 4:52 am #14063
    JesseG
    Member

    Have you set the "L/R Ref Level" in calibration to be less than -0.0dB?  Setting that below should avoid any "overs" with the output.  Those DSPs won't help because those are only for input and encoder plugin paths.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Breakaway Professional Products – [discontinued]’ is closed to new topics and replies.