line in

Home › Forums › Breakaway Professional Products – [discontinued] › line in

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 24, 2009 at 2:24 pm #209
    Anonymous
    Guest

    I want gladly leave breakaway broadcast work on the line in and afterwards to the boxes how I cancellation him so that he catches the line in sorry for my bad English I am Dutch

    http://detaghof.nl/1.bmp
    http://detaghof.n/2.bmp
    http://detaghof.nl/3.jpg

    January 24, 2009 at 2:33 pm #6370
    Leif
    Keymaster

    Hi Gerhardt!

    Try the following:

    Start / Run: sndvol32 /r

    Make sure to select Line In, not "Stereo Mix".

    If this is not the correct answer, please ask the question in Dutch — there are several Dutch speakers around, I’m sure one of them will help 😉.

    Vriendelijke Groeten,
    ///Leif

    January 24, 2009 at 2:41 pm #6371
    Anonymous
    Guest

    [quote author=”Leif”]Hi Gerhardt!

    Try the following:

    Start / Run: sndvol32 /r

    Make sure to select Line In, not "Stereo Mix".

    If this is not the correct answer, please ask the question in Dutch — there are several Dutch speakers around, I’m sure one of them will help 😉.

    Vriendelijke Groeten,
    ///Leif[/quote]

    ik wil hem als limeter gaan gebruiken dus heb ik de aperatuur op de line in zitten en een de boxen gewoon in d boxen maar dan pakt het programa hemniet heb eve wat fotos er bij gemaakt

    http://detaghof.nl/1.bmp
    http://detaghof.n/2.bmp
    http://detaghof.nl/3.jpg

    January 25, 2009 at 4:37 am #6372
    Leif
    Keymaster

    Look in the volume control (volumeregeling), make sure you are looking at the Recording Controls, and select Line In.

    If you can’t find it, perhaps there is control panel for the C-Media (CMI) Audio where you can select the recording source?

    If not, it may be worth buying a better sound card, such as ESI Juli@ or ASUS Xonar DX.

    ///Leif

    January 25, 2009 at 3:17 pm #6373
    Diekgait
    Member

    All of you non-dutch please ignore.

    Ha Gerard,

    Kies bij input-device de geluidskaart die je wilt gebruiken en ga vervolgens naar:
    Start > Configuratiescherm > Geluiden en Auadio apparaten > Audio.
    Kies bij opname apparaat weer de gluidskaart die je wilt gebruiken en druk op Volume.
    Selecteer nu de line-in of mic-in.
    Line-in is meestal blauw.
    Mic in is meestal roze.

    De mic-in kun je alleen maar gebruken om rechtstreeks een mic aan te sluiten. Voor een externe mixer of wat anders de line-in gebruiken

    Groeten Dennis

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Breakaway Professional Products – [discontinued]’ is closed to new topics and replies.