- This topic has 1 reply, 1 voice, and was last updated 12 years, 2 months ago by
.
-
Posts
-
I recently installed breakaway on my laptop. No audio will come out of my speakers but I can tell there’s audio playing under the audio defaults. I have pipe line1 as my default audio and when I try to record using total recorder and a few others It cant detect any sound. With total recorder its set to record any sound device. And If I turn breakaway off and still have music playing it will pick up the sound. I did have it working for a little while but then it just for no apparent reason stoped working.
It’s because your soundcard driver doesn’t support multiple clients on that "port". It’s probably Kernel Streaming (aka KS) which you’re using. Most soundcard drivers don’t support multi-client access on KS, so you’ll have to use DirectSound (aka DS) or MME (aka Wave) to do that, assuming your soundcard driver does support that. Most do.
The unfortunate side effect is that you’re usually going to need more buffering, so you get more latency. I recommend trying DS first, as it is usually more stable with lower latency than Wave.
- You must be logged in to reply to this topic.