Breakaway in STL (Studio to Transmitter Link – IP Link)

Home › Forums › Breakaway Professional Products – [discontinued] › Breakaway in STL (Studio to Transmitter Link – IP Link)

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • December 19, 2011 at 11:34 pm #1247
    rdr
    Member

    Hello!!

    We’ve the chance to broadcast from a higher building to improve our coverage zone. That building is a little bit far from our studio so we’ll have to link the transmitter with the studio via IP (Internet DSL, the buildings are not in line of sight so a WiFi link will not work, won’t it?)

    We’re running now with Breakaway in one PC connected directly to our FM Transmitter (which is in the roof of our studio’s house 😉 )

    I’m thinking if it would be possible to let the Breakaway main processing (New York preset) in the studio, and then buy another PC with Breakway (with presets ¿¿¿Protection Clip 6dB, Protection Limit 12dB???) at our Tx site.

    Would that work?
    What about the loudness and sound quality? Would that be the same in case of "double" processing (NewYork + Protection) than the alone New York processing?

    Thanks!!!

    December 20, 2011 at 5:26 am #12896
    radio oude stijl
    Member

    [quote author=”rdr”]Hello!!I’m thinking if it would be possible to let the Breakaway main processing (New York preset) in the studio, and then buy another PC with Breakway (with presets ¿¿¿Protection Clip 6dB, Protection Limit 12dB???) at our Tx site.[/quote]
    Why??? Why not just keep the pc at the TX and use your STL unprocessed?

    December 20, 2011 at 6:20 am #12897
    JesseG
    Member

    [quote author=”radio oude stijl”]Why??? Why not just keep the pc at the TX and use your STL unprocessed?[/quote]
    +1

    December 21, 2011 at 3:49 am #12898
    rdr
    Member

    [quote author=”radio oude stijl”][quote author=”rdr”]Hello!!I’m thinking if it would be possible to let the Breakaway main processing (New York preset) in the studio, and then buy another PC with Breakway (with presets ¿¿¿Protection Clip 6dB, Protection Limit 12dB???) at our Tx site.[/quote]
    Why??? Why not just keep the pc at the TX and use your STL unprocessed?[/quote]

    Because we change the "preset" depending on the kind of the music program that we transmit (New York for Rock/Pop, then French Kiss for Dance) 🙄

    So, would it be possible to make an STL with processed audio and then, "re-process" that audio on the Transmitter?
    Would it damage the audio so hard?

    Thanks!

    December 21, 2011 at 4:55 am #12899
    Milky
    Keymaster

    Why not just remote into the PC at the TX and change BA there? Depending on the OS, there’s Remote Desktop (Windoz), VNC (just about any OS), Logmein/Teamviewer (Winners again). You could even do it with a phone app.

    December 21, 2011 at 6:27 am #12900
    radio oude stijl
    Member

    [quote author=”rdr”]So, would it be possible to make an STL with processed audio and then, "re-process" that audio on the Transmitter?[/quote]Sure…
    [quote author=”rdr”]Would it damage the audio so hard?[/quote]Absolutely…

    If your sourcematerial (music) is stored in a compressed format and your STL is compressed as well (MP2, MP3, AAC, etc) don’t even consider doing it that way.
    Like suggested, use Remote DesktoP or similar solutions.

    December 24, 2011 at 11:47 pm #12901
    rdr
    Member

    Wow!! I didn’t know anything about "Virtual Desktops"… 😀 😀

    I will give it a try!! Thaaanks! 😀 😀

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Breakaway Professional Products – [discontinued]’ is closed to new topics and replies.