Breakaway Live and Sam Broadcaster

Home › Forums › Breakaway Professional Products – [discontinued] › Breakaway Live and Sam Broadcaster

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 4, 2011 at 9:30 pm #1082
    Gerrie
    Member

    Hello guys,

    I have 2 Questions,

    1, Are there any issues between Sam Broadcaster 4.7.4 and Breakaway Live 0.90.96 with DSP use?

    2,why have i different sound on my stream between Raduga 3.91 and Sam Broadcaster 4.7.4 while Breakaway Live used the same preset and confugaration.Raduga sounds more warmer than Sam Broadcaster.

    April 4, 2011 at 9:47 pm #12066
    Dj Buik
    Member

    Did you disable ALL sound processing in Sam Broadcaster?

    I don’t know Raduga but if it has sound processing too, you need to
    disable this too, to have a fair comparison between the two programs.

    April 4, 2011 at 9:58 pm #12067
    Gerrie
    Member

    Dj Bulk,

    Yes,i disable all the processing in Sam Broadcaster,I get a APPCRASH in w7 ore Sam Stops playing and shut down.This happen when i in Breakaway any DSP plug-in enabled,now at this moment Sam is running good ,but without any DSP used in Sam and Breakaway Live.

    Raduga has not any processing in it.

    April 4, 2011 at 10:05 pm #12068
    Dj Buik
    Member

    You don’t need any DSP’s in Sam. Use all your processing DSP dll’s in Breakaway only.
    You could use Livelink, in SAM, to avoid using the soundcard.

    Read my setup guide:
    http://www.claessonedwards.com/forum/viewtopic.php?f=5&t=1735

    There is a sample setup with SAM Broadcaster.

    April 4, 2011 at 10:19 pm #12069
    Gerrie
    Member

    That’s is one of issues,when i use te Livelink between Sam and Breakaway Live Sam stops after a few hours of playing
    when i’m using livelink not than Sam run’s for a day of 3 and more.

    The soundcard is a M-audio96 and is running without any problem,

    also i don’t use the encoder from Sam,i have the Edcast encoder as dsp in Breakaway live,that’s the only dsp what now is running,

    we have trided everything like no virus software,the encoder in Sam,and many things more

    Is there some issues with the DSP host may be?

    April 5, 2011 at 5:38 am #12070
    Dj Buik
    Member

    Hi gerrie,

    I have livelink also runing with an older version of SAM with no problem.
    No have experience with the new version.

    I don’t think it’s a issue with the Edcast client in Breakaway,
    because then we must have read it on this forum.

    Maybe other users on this forum use the latest version of SAM.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Breakaway Professional Products – [discontinued]’ is closed to new topics and replies.