Wouter K

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 6, 2014 at 4:33 pm in reply to: Geluid radio continu #13914
    Wouter K
    Member

    Stukje opnemen van Radio Continu denk ik, en dezelfde platen afspelen via je Breakaway en dan vergelijken 😉

    Waarom wil je eigenlijk dezelfde sound als Continu? Je kunt toch beter een eigen sound creëren

    July 6, 2014 at 4:30 pm in reply to: BBP and airomate #13657
    Wouter K
    Member

    Thank you for replying 🙂

    I've solved the problem with the crackles/glitches, after some more research on the internet I found that any other devices installed on the computer can cause problems with the soundprocessing.

    I deleted the LAN driver, turned onboard audio and a few other things off in the BIOS, and used your settings for Airomate shown above.
    RDS pilot in Breakaway at 0db gain is 4% so thats fine I guess.

    We've had a succesfull 6 hour test broadcast, longer than the setup would ever work before, so I think we're there!

    Thank you for your help, now I need to find someone nearby with a analyzer so I can calibrate the ESI Juli@.

    June 3, 2014 at 3:32 pm in reply to: BBP and airomate #13655
    Wouter K
    Member

    Sorry for kicking this topic, but I thought it was better if you guys could see the example right away.

    I kinda have the same problem as the TS, but with my setup RDS pilot goes absent after a few hours of playing.

    It starts with a sort of crackling sounds which becomes louder and then RDS pilot goes absent and audio is a mess 🙁

    Edit: Also different from TS, after pilot going absent, RDS isnt working on the tuner and, as mentioned, audio is a complete mess

    I have used these settings:

    In the Airomate Settings, Synchronization page:

        Enable the synchronization channel.
        Set Frequency to 19000hz
        Set Level to 50.0%.
        Set Waveform to Sine.

    In the Airomate Settings, RDS page:

        Enable RDS.
        Set Level to 50%.
        Set Frequency to Automatic.

    As advised here: http://www.claessonedwards.com/index.php?option=com_content&view=article&id=58&Itemid=1029

    Am I doing it wrong? Do I need yorkie98's settings?

    My PC setup:

    AMD Athlon 64 x2 4200+
    4GB RAM memory
    ESI Juli@ soundcard
    Clean Windows XP install
    Breakaway Broadcast Processor ASIO v0.90.95
    Airomate 2

    I live in Europe by the way (The Netherlands) so I have 50us Pre-Emphasis. Not sure if it matters but thought i'd mention it.

    Can this be related to my RDS settings? Or is my PC not fast enough/other issue.

    Thank you so much in advance for helping!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)